Leaf-inspired microcontact printing vascular patterns.

The vascularization of tissue grafts is critical for maintaining viability of the cells within a transplanted graft. A number of strategies are currently being investigated including very promising microfluidics systems. Here, we explored the potential for generating a vasculature-patterned endothelial cells that could be integrated into distinct layers between sheets of primary cells. Bioinspired from the leaf veins, we generated a reverse mold with a fractal vascular-branching pattern that models the unique spatial arrangement over multiple length scales that precisely mimic branching vasculature. By coating the reverse mold with 50 μg ml-1 of fibronectin and stamping enabled selective adhesion of the human umbilical vein endothelial cells (HUVECs) to the patterned adhesive matrix, we show that a vascular-branching pattern can be transferred by microcontact printing. Moreover, this pattern can be maintained and transferred to a 3D hydrogel matrix and remains stable for up to 4 d. After 4 d, HUVECs can be observed migrating and sprouting into Matrigel. These printed vascular branching patterns, especially after transfer to 3D hydrogels, provide a viable alternative strategy to the prevascularization of complex tissues

Effects of ECG Data Length on Heart Rate Variability Among Young Healthy Adults

The relationship between the robustness of HRV derived by linear and nonlinear methods to the required minimum data lengths has yet to be well understood. The normal electrocardiography (ECG) data of 14 healthy volunteers were applied to 34 HRV measures using various data lengths, and compared with the most prolonged (2000 R peaks or 750 s) by using the Mann–Whitney U test, to determine the 0.05 level of significance. We found that SDNN, RMSSD, pNN50, normalized LF, the ratio of LF and HF, and SD1 of the Poincaré plot could be adequately computed by small data size (60–100 R peaks). In addition, parameters of RQA did not show any significant differences among 60 and 750 s. However, longer data length (1000 R peaks) is recommended to calculate most other measures. The DFA and Lyapunov exponent might require an even longer data length to show robust results. Conclusions: Our work suggests the optimal minimum data sizes for different HRV measures which can potentially improve the efficiency and save the time and effort for both patients and medical care providers

Respiration rate and volume measurements using wearable strain sensors.

Current methods for continuous respiration monitoring such as respiratory inductive or optoelectronic plethysmography are limited to clinical or research settings; most wearable systems reported only measures respiration rate. Here we introduce a wearable sensor capable of simultaneously measuring both respiration rate and volume with high fidelity. Our disposable respiration sensor with a Band-Aid© like formfactor can measure both respiration rate and volume by simply measuring the local strain of the ribcage and abdomen during breathing. We demonstrate that both metrics are highly correlated to measurements from a medical grade continuous spirometer on participants at rest. Additionally, we also show that the system is capable of detecting respiration under various ambulatory conditions. Because these low-powered piezo-resistive sensors can be integrated with wireless Bluetooth units, they can be useful in monitoring patients with chronic respiratory diseases in everyday settings

Shrink film patterning by craft cutter: complete plastic chips with high resolution/high-aspect ratio channel

This paper presents a rapid, ultra-low-cost approach to fabricate microfluidic devices using a polyolefin shrink film and a digital craft cutter. The shrinking process (with a 95% reduction in area) results in relatively uniform and consistent microfluidic channels with smooth surfaces, vertical sidewalls, and high aspect ratio channels with lateral resolutions well beyond the tool used to cut them. The thermal bonding of the layers results in strongly bonded devices. Complex microfluidic designs are easily designed on the fly and protein assays are also readily integrated into the device. Full device characterization including channel consistency, optical properties, and bonding strength are assessed in this technical note

Unconventional Low-Cost Fabrication and Patterning Techniques for Point of Care Diagnostics

The potential of rapid, quantitative, and sensitive diagnosis has led to many innovative ‘lab on chip’ technologies for point of care diagnostic applications. Because these chips must be designed within strict cost constraints to be widely deployable, recent research in this area has produced extremely novel non-conventional micro- and nano-fabrication innovations. These advances can be leveraged for other biological assays as well, including for custom assay development and academic prototyping. The technologies reviewed here leverage extremely low-cost substrates and easily adoptable ways to pattern both structural and biological materials at high resolution in unprecedented ways. These new approaches offer the promise of more rapid prototyping with less investment in capital equipment as well as greater flexibility in design. Though still in their infancy, these technologies hold potential to improve upon the resolution, sensitivity, flexibility, and cost-savings over more traditional approaches

Finishing the euchromatic sequence of the human genome

The sequence of the human genome encodes the genetic instructions for human physiology, as well as rich information about human evolution. In 2001, the International Human Genome Sequencing Consortium reported a draft sequence of the euchromatic portion of the human genome. Since then, the international collaboration has worked to convert this draft into a genome sequence with high accuracy and nearly complete coverage. Here, we report the result of this finishing process. The current genome sequence (Build 35) contains 2.85 billion nucleotides interrupted by only 341 gaps. It covers ∼99% of the euchromatic genome and is accurate to an error rate of ∼1 event per 100,000 bases. Many of the remaining euchromatic gaps are associated with segmental duplications and will require focused work with new methods. The near-complete sequence, the first for a vertebrate, greatly improves the precision of biological analyses of the human genome including studies of gene number, birth and death. Notably, the human enome seems to encode only 20,000-25,000 protein-coding genes. The genome sequence reported here should serve as a firm foundation for biomedical research in the decades ahead

Shrink-Induced Silica Structures for Far-field Fluorescence Enhancements

Dense multiscale silica (SiO2) micro- and nanostructures are fabricated on a pre-stressed polymer fi lm. This novel SiO 2 substrate serves as a robust platform to enhance the fl uorescence signal of bound biomolecules. Through a combination of surface concentration, light scattering, and changes in the photophysical properties of the confi ned dye molecules, dramatic fl uorescence signal enhancements (average = 116 times greater than on planar glass) and increased signal-to-noise ratio (76:1) are demonstrated with tetramethylrhodamine isothiocyanate (TRITC)-conjugated streptavidin (STRITC) on SiO 2 structures. Enhanced detection sensitivity of STRITC over glass on the SiO 2 structures is achieved down to a detection limit of 11 ng mL −1 . Such signifi cant fl uorescence signal enhancements have importance in practical applications such disease diagnostics and surface sensing

Shrink-Induced Silica Structures for Far-field Fluorescence Enhancements

Dense multiscale silica (SiO2) micro- and nanostructures are fabricated on a pre-stressed polymer fi lm. This novel SiO 2 substrate serves as a robust platform to enhance the fl uorescence signal of bound biomolecules. Through a combination of surface concentration, light scattering, and changes in the photophysical properties of the confi ned dye molecules, dramatic fl uorescence signal enhancements (average = 116 times greater than on planar glass) and increased signal-to-noise ratio (76:1) are demonstrated with tetramethylrhodamine isothiocyanate (TRITC)-conjugated streptavidin (STRITC) on SiO 2 structures. Enhanced detection sensitivity of STRITC over glass on the SiO 2 structures is achieved down to a detection limit of 11 ng mL −1 . Such signifi cant fl uorescence signal enhancements have importance in practical applications such disease diagnostics and surface sensing